LS 460 V8-4.6L (1UR-FSE) (2007)
a. Install the protector.
8. INSTALL NO.1 BRAKE ACTUATOR HOSE
a. With the paint mark on the hose's tip facing the bottom of the vehicle, install the No.1 brake actuator hose to the brake actuator with the hose
clip.
NOTE: When inserting the hose, be careful that there is no excessive weight applied to the union of the brake actuator (especially in the union
rotation direction).
HINT: Install the hose clip so that its claws face the rear of the vehicle.
9. INSTALL NO.5 BRAKE ACTUATOR BRACKET
a. Install the No. 5 brake actuator bracket to the body with the bolt.
Torque: 11 N.m (112 kgf.cm, 8 ft.lbf)