LS 460 V8-4.6L (1UR-FSE) (2007)
/Page-1270018.png)
b. Set each brake tube to the correct positions on the brake actuator as given in the illustration.
c. Using SST, connect the 6 brake tubes.
SST 09023-00101
Torque:
15 N.m (155 kgf.cm, 11 ft.lbf) without SST
14 N.m (145 kgf.cm, 10 ft.lbf) with SST
HINT:
-
Use a torque wrench with a fulcrum length of 300 mm (11.81 in.).
-
This torque value is effective when SST is parallel to a torque wrench.
12. INSTALL FRONT WHEEL
Torque: 140 N.m (1428 kgf.cm, 103 ft.lbf)
13. INSTALL RESERVOIR BRACKET
14. INSTALL NO. 1 RESERVOIR HOSE
15. INSTALL BRAKE FLUID RESERVOIR
16. CONNECT ENGINE ROOM NO.3 RELAY BLOCK
