LS 460 V8-4.6L (1UR-FSE) (2007)
4. REMOVE MASTER CYLINDER PUSH ROD CLEVIS
(a)
Remove the push rod clevis and lock nut.
HINT: If the protrusion of the push rod in relation to the push rod clevis is measured beforehand, it is easier to perform the brake pedal
height adjustment after the brake master cylinder with simulator is installed.
5. REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY
(a)
Remove the screw and brake master cylinder reservoir.
6. REMOVE MASTER CYLINDER RESERVOIR GROMMET
(a)
Remove the 2 reservoir grommets from the brake master cylinder with simulator.
REASSEMBLY