LS 460 V8-4.6L (1UR-FSE) (2007)
b. Remove the 3 cushions and 3 spacers from the brake actuator bracket.
c. Remove the 3 bolts and No.3 brake actuator bracket from the brake actuator.
INSTALLATION
NOTE: While the battery is connected, even if the engine switch is off, the brake control system activates when the brake pedal is depressed or the door
courtesy switch turns on.
Therefore during servicing of the brake system components, do not operate the brake pedal and open/ close the doors while the battery is connected.
1. INSTALL BRAKE ACTUATOR
NOTE: Do not remove the hole plug before installing a new brake actuator because the brake actuator is filled with brake fluid.