LS 460 V8-4.6L (1UR-FSE) (2007)
c. Install the brake booster pump bush (labeled C) and a new brake actuator bracket clamp (labeled D) to the brake accumulator pump.
NOTE: Make sure to securely insert the brake accumulator pump until the claws of the clamp are attached.
3. INSTALL NO. 4 BRAKE ACTUATOR BRACKET
a. Install the No. 4 brake actuator bracket to the brake actuator with the bolt.
Torque: 18 N.m (184 kgf.cm, 13 ft.lbf)
4. CONNECT BRAKE ACCUMULATOR PUMP CONNECTOR BOX
a. Connect the brake accumulator pump connector box as follows:
1. Install the connector box with the nut (labeled A).
Torque: 6.0 N.m (61 kgf.cm, 53 in.lbf)
2. Attach the wiring harness clamp (labeled B).