LS 460 V8-4.6L (1UR-FSE) (2007)
e. Connect the brake actuator connector.
NOTE:
-
Before connecting the vehicle wire harnesses, make sure that the connector faces are free of foreign matter.
-
Make sure that the connector is locked securely.
11. CONNECT BRAKE TUBE
a. Using SST, connect the No.1 (labeled A) and No.2 (labeled B) brake actuator tubes.
SST 09023-00101
Torque:
15 N.m (155 kgf.cm, 11 ft.lbf) without SST
14 N.m (145 kgf.cm, 10 ft.lbf) with SST
HINT:
-
Use a torque wrench with a fulcrum length of 300 mm (11.81 in.).
-
This torque value is effective when SST is parallel to a torque wrench.
NOTE: Do not damage the No.1 and No.2 brake actuator tubes.