LS 460 V8-4.6L (1UR-FSE) (2007)
(c)
Install the seat belt control ECU with the 2 nuts.
Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
(d) Connect the 2 connectors.
2. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH
3. INSTALL DECK TRIM SIDE BOARD LH
4. INSTALL REAR FLOOR FINISH PLATE
5. INSTALL LUGGAGE COMPARTMENT MAT SUBASSEMBLY
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
7. INSTALL COWL TOP VENTILATOR LOUVER RH
8. PERFORM INITIALIZATION
(a)
Perform initialization.
NOTICE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
9. PERFORM CALIBRATION
(a)
Clear the electric parking brake ECU memory and acquire tension sensor zero point.