LS 460 V8-4.6L (1UR-FSE) (2007)
e. Remove the 2 bolts (labeled E) and 2 sensor clamps (labeled F).
f.
for RH:
1. Disconnect the pad wear indicator connector (labeled G).
2. Remove the bolt (labeled H) and sensor clamp (labeled I).
g. Disconnect the connector (labeled J) from the front speed sensor.
NOTE:
-
Be careful not to damage the speed sensor.
-
Prevent foreign matter from adhering to the speed sensor.
5. DISCONNECT FRONT DISC BRAKE CALIPER ASSEMBLY
6. REMOVE FRONT DISC
7. REMOVE FRONT AXLE HUB SUB-ASSEMBLY
HINT: The front speed sensor is a component of the front axle hub sub-assembly.If the sensor malfunctions, replace the front axle hub
sub-assembly.