LS 460 V8-4.6L (1UR-FSE) (2007)
Step 2:
Mark the front of the bearing cap bolts with paint.
Tighten the bearing cap bolts another 90° in the order shown in step 1.
heck that the painted marks are now at a 90° angle to the front.
Check that the crankshaft turns smoothly.
Install and uniformly tighten the 10 main bearing cap bolts and 10 seal washers in several steps, in the sequence shown in the illustration.
Torque ..................................................................................................................................................................... 45 N*m (459 kgf*cm, 33 ft.*lbf)