LS 460 V8-4.6L (1UR-FSE) (2007)
(g) Apply a small amount of engine oil to a new drain plug O-ring, and install it to the oil filter cap.
NOTICE: Before installing the O-ring, remove any dirt or foreign matter from the installation surface of the oil filter cap.
(h) Install the oil filter drain plug.
Torque: 13 N*m (133 kgf*cm, 10 ft.*lbf)
NOTICE: Be careful that the O-ring does not get caught between the parts.
5. ADD ENGINE OIL
(a)
Add fresh oil and install the oil cap.
Standard engine oil
Standard capacity
(b) Install the oil filler cap.
(c)
Close the oil filler cap service hole cover.
6. INSPECT FOR ENGINE OIL LEAK