LS 460 V8-4.6L (1UR-FSE) (2007)
/Page-636005.png)
19. REMOVE INTAKE MANIFOLD
a. Disconnect the No.1 ventilation hose from intake manifold.
b. Remove the 8 bolts, 2 nuts and intake manifold.
c. Remove the 2 gaskets from the intake manifold.
INSTALLATION
1. INSTALL INTAKE MANIFOLD
a. Install 2 new gaskets to the intake manifold.
b. Temporarily install the intake manifold with the 2 nuts and 8 bolts. Then tighten the 2 nuts and 8 bolts uniformly in the order given in the
illustration.
Torque: 21 N.m (214 kgf.cm, 15 ft.lbf)
