LS 460 V8-4.6L (1UR-FSE) (2007)
7. INSPECT NO. 3 CHAIN TENSIONER ASSEMBLY
(a)
Check that the plunger moves smoothly.
(b) Measure the worn depth of the chain tensioner.
Maximum depth: 0.9 mm (0.035 in.)
If the depth is greater than the maximum, replace the chain tensioner.
8. INSPECT CHAIN TENSIONER SLIPPER
(a)
for Bank 1:
(1) Measure the worn depth of the chain tensioner slipper.
Maximum depth: 1.0 mm (0.039 in.)
If the depth is greater than the maximum, replace the chain tensioner slipper.
(b) for Bank 2:
(1) Measure the worn depth of the chain tensioner slipper.
Maximum depth: 1.0 mm (0.039 in.)
If the depth is greater than the maximum, replace the chain tensioner slipper.