LS 460 V8-4.6L (1UR-FSE) (2007)
1. INSTALL WATER PUMP
(a)
Install the water pump and gasket with the 9 bolts as shown the illustration.
Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf) for bolt A
23 N*m (235 kgf*cm, 17 ft.*lbf) for bolt B
47 N*m (479 kgf*cm, 35 ft.*lbf) for bolt C
2. INSTALL WATER PUMP PULLEY
(a)
Temporarily install the pulley with the 4 bolts.
(b) Using SST, hold the pulley and tighten the 4 bolts.
SST 09960-10010 (09962-01000, 09963-01000)
Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf)
3. INSTALL WATER INLET HOUSING
(a)
Install a new gasket to the water pump.
(b) Install the water inlet housing with the 3 bolts.
Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf)
4. CONNECT NO. 3 WATER BY-PASS HOSE
(a)
Using needle-nose pliers, grip the claws of the clip and slide the clip to connect the No. 3 water by-pass hose.