LS 460 V8-4.6L (1UR-FSE) (2007)
a. Remove the bolt and disconnect the cooler refrigerant liquid pipe from the cooler condenser.
NOTE:
-
When loosening the bolt, do not allow any tools to contact the pipe.
-
When loosening the bolt, hold a part of the pipe near the connector.
b. Remove the O-ring from the cooler refrigerant liquid pipe.
NOTE: Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
31. REMOVE COOLER CONDENSER ASSEMBLY
a. Remove the 4 bolts and cooler condenser.
32. REMOVE COOLER DRYER
a. Using a 14 mm socket hexagon wrench, remove the cap from the modulator.