LS 460 V8-4.6L (1UR-FSE) (2007)
a. Install the damper servo with the 2 screws.
b. Connect the connector.
c. Set the lever so that the cutout part engages with a tooth of the gear, attach the claw to install the lever.
17. INSTALL AIR MIX SERVO MOTOR LH (Cool)
a. Make sure that the rod dose not rotate further by trying to rotate it clockwise.
b. Install the damper servo with the 2 screws.
c. Connect the connector.
18. INSTALL AIR MIX SERVO MOTOR RH (Cool)
a. Make sure that the rod dose not rotate further by trying to rotate it clockwise.
b. Install the damper servo with the 2 screws.
c. Connect the connector.
19. INSTALL COOL AIR BYPASS SERVO MOTOR LH