LS 460 V8-4.6L (1UR-FSE) (2007)
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
NOTE: After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory
and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery
terminal.
4. DISCONNECT AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY
a. Detach the 3 claws and remove the cover.
b. Remove the 2 bolts and 2 tubes.
c. Remove the 2 O-rings from the tube.
5. REMOVE REAR SEAT ASSEMBLY (for Power Seat)
a. Remove the rear seat.
6. REMOVE REAR SEAT ASSEMBLY (for Ottoman)
a. Remove the rear seat.
7. REMOVE REAR SEAT ASSEMBLY (for Fixed Type)
a. Remove the rear seat.
8. REMOVE REAR DOOR SCUFF PLATE LH
a. for Short Body:
Remove the rear door scuff plate.
b. for Long Body:
Remove the rear door scuff plate.
9. REMOVE REAR DOOR SCUFF PLATE RH
a. for Short Body:
Remove the rear door scuff plate.
b. for Long Body:
Remove the rear door scuff plate.
10. REMOVE REAR SEAT SIDE GARNISH LH
a. for Short Body:
Remove the rear seat side garnish.