LS 460 V8-4.6L (1UR-FSE) (2007)
/Page-1778012.png)
c. Attach the claw to install the main plate.
8. INSTALL HOT AIR BYPASS SERVO MOTOR
a. Align the protruding parts on the case and cover, install the damper servo with the 2 screws.
b. Connect the connector.
9. INSTALL AIR MIX SERVO MOTOR LH (Hot)
a. Make sure that the rod dose not rotate further by trying to rotate it clockwise.
b. Install the damper servo with the 2 screws.
c. Connect the connector.
10. INSTALL AIR MIX SERVO MOTOR RH (Hot)
a. Make sure that the rod dose not rotate further by trying to rotate it clockwise.
b. Install the damper servo with the 2 screws.
