LS 460 V8-4.6L (1UR-FSE) (2007)
4.
Depress the brake pedal and press the engine START/STOP switch once to start the engine.
5.
Push and hold the "AUTO" switch on the mirror for about 9 seconds until "CAL" appears on the display.
6.
Drive the vehicle slowly at 5 mph (8 km/h), or less, in a circle until the direction is displayed. If there is NOT enough space to drive in a circle,
turn the car around as shown, doing two three-point turns in succession.
After driving in 1 to 3 circles in the above method, "CAL" disappears and calibration is complete.
NOTE:
^
Do NOT perform calibration of the compass in a place where the Earth's magnetic field is subject to interference by artificial magnetic
fields (underground parking, under a steel tower, between buildings, roof parking, near a railroad crossing, near a large vehicle, etc.)
^
During calibration, do NOT operate electric systems (moon roof, power windows, etc.) as they may interfere with the calibration.