LS 460 V8-4.6L (1UR-FSE) (2007)
Headlamp Alignment Sensor: Testing and Inspection
INSPECTION
1. INSPECT FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY
a. Connect 3 dry cell batteries (1.5 V) in a series.
b. Connect the positive (+) lead from the batteries to terminal 3, and the negative (-) lead from the batteries to terminal 1.
c. Measure the voltage between terminals 2 and 1 while slowly moving the link up and down.
If the result is not as specified, replace the rear height control sensor sub-assembly.