LS 460 V8-4.6L (1UR-FSE) (2007)
1. REMOVE REAR VANITY LIGHT ASSEMBLY
a. Using a screwdriver, detach the 4 claws and remove the lens.
HINT: Tape the screwdriver tip before use.
b. Remove the 2 screws.
c. Disconnect the connector and remove the rear vanity light.
INSTALLATION
1. INSTALL REAR VANITY LIGHT ASSEMBLY
a. Connect the connector.
b. Install the rear vanity light with the 2 screws.
c. Attach the 4 claws and install the lens.