LS 460 V8-4.6L (1UR-FSE) (2007)
(b) Press and hold the tire pressure warning reset switch for 3 seconds or more so that the tire pressure warning light blinks 3 times.
HINT:
-
The initialization can be confirmed through the multi-information display.
-
The order in which the data is received is random.
-
If the signals from all the wheels are received the initialization is complete.
-
It may take about 2 or 3 minutes until the values are displayed. If the values are not displayed after a few minutes perform troubleshooting
according to the inspection procedure for DTCs C2121/21 to C2125/25.
NOTICE:
-
If the initialization has not been completed successfully, DTC C2177/77 is set after a vehicle speed of 8 km/h (5 mph) or more continues
for 20 minutes or more.
-
The initialization can be terminated by connecting terminals TC and CG of the DLC3 connector.