LS 460 V8-4.6L (1UR-FSE) (2007)
(a)
Install the front axle hub to the steering knuckle with the 4 bolts.
Torque: 65 N*m (663 kgf*cm, 48 ft.*lbf)
2. INSTALL STEERING KNUCKLE SUB-ASSEMBLY LH
(a)
Install the steering knuckle to the front No. 1 suspension upper arm LH and front No. 2 suspension upper arm LH with the nuts.
Torque: 60 N*m (612 kgf*cm, 44 ft.*lbf)
(b) Install new clips.
NOTICE: If it is necessary to align the holes for the clips after installing the nuts, the nuts can be tightened up to 60° more.
3. CONNECT FRONT NO. 2 SUSPENSION LOWER ARM ASSEMBLY LH
(a)
Connect the front No. 2 suspension lower arm assembly LH to the steering knuckle with the nut.
Torque: 145 N*m (1479 kgf*cm, 107 ft.*lbf)
(b) Install a new clip.
NOTICE: If it is necessary to align the holes for the clip after installing the nut, the nut can be tightened up to 60° more.
4. CONNECT FRONT SHOCK ABSORBER ASSEMBLY LH
(a)
Install the bottom side of the front shock absorber assembly LH to the No. 2 suspension lower arm LH.
Then insert the bolt from the rear of the vehicle and temporarily install it with the nut.
Torque: 108 N*m (1101 kgf*cm, 80 ft.*lbf)