LS 460 V8-4.6L (1UR-FSE) (2007)
5. INSTALL FRONT STABILIZER LINK ASSEMBLY LH
(a)
Install the front stabilizer link with the 2 nuts.
Torque: 84 N*m (857 kgf*cm, 62 ft.*lbf)
HINT: If the ball joint turns together with the nut, use a hexagon (6 mm) wrench to hold the stud.
6. CONNECT FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH
(a)
Install the bracket of the front height control sensor LH to the front No. 2 suspension lower arm LH with the bolt.
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
7. CONNECT FRONT NO. 1 SUSPENSION LOWER ARM ASSEMBLY LH
(a)
Connect the No. 1 suspension lower arm to the steering knuckle with the nut.
Torque: 145 N*m (1479 kgf*cm, 107 ft.*lbf)
(b) Install a new clip.
NOTICE: If it is necessary to align the holes for the clip after installing the nut, the nut can be tightened up to 60° more.
8. CONNECT TIE ROD ASSEMBLY LH