LS 460 V8-4.6L (1UR-FSE) (2007)
b. Using SST, install the fuel pressure sensor to the No.1 delivery pipe.
SST 09922-10010
Torque:
without SST
44 N.m (449 kgf.cm, 32 ft.lbf)
with SST
40 N.m (409 kgf.cm, 30 ft.lbf)
NOTE:
-
Do not apply oil to threads of the pressure sensor and delivery pipe.
-
Do not allow foreign matter to enter the pipe during the installation.
HINT:
-
Use a torque wrench with a fulcrum length of 300 mm (11.81 in).
-
Make sure SST and wrench are connected in a straight line.
c. Connect the connector.
2. INSTALL NO.2 ENGINE COVER SUB-ASSEMBLY