LS 460 V8-4.6L (1UR-FSE) (2007)
Information Bus: Reading and Clearing Diagnostic Trouble Codes
With Manufacturer's Scan Tool
DTC CHECK
HINT: Refer to the intelligent tester (with CAN VIM) or Techstream operator's manual for further details.
1. CHECK DTC
a. Connect the intelligent tester (with CAN VIM) or Techstream to the DLC3.
b. Turn the engine switch on (IG) and turn the tester ON.
c. Enter the following menus:
1. Intelligent tester - Select: DIAGNOSIS / OBD / MOBD / (desired system) / DTC INFO /
2. Techstream - Select: Body / (desired system) / Trouble Codes /
d. Read the DTCs by following the directions on the tester's screen.
Without Scan Tool
LEXUS does not provide a procedure for Reading Trouble Code Without Scan Tool.
With Manufacturer's Scan Tool
CLEAR DTC
a. Connect the intelligent tester (with CAN VIM) or Techstream to the DLC3.
b. Turn the engine switch on (IG) and turn the tester ON.
c. Enter the following menus:
1. Intelligent tester - Select: DIAGNOSIS / OBD / MOBD / (desired system) / DTC INFO /
2. Techstream - Select: Body / (desired system) / Trouble Codes /
d. Erase the DTCs by following the directions on the tester's screen.
Without Scan Tool
LEXUS does not provide a procedure for Clearing Trouble Code Without Scan Tool.