LS 460 V8-4.6L (1UR-FSE) (2007)
b. Remove the grommet.
c. Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.
SST 09224-00010
INSTALLATION
1. INSTALL HEATED OXYGEN SENSOR (for Bank 1)
a. Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.
SST 09224-00010
Torque: without SST
44 N.m (449 kgf.cm, 32 ft.lbf)
with SST
40 N.m (408 kgf.cm, 30 ft.lbf)
HINT: Use a torque wrench with a fulcrum length of 300 mm (11.81 in.).
b. Install the grommet to the vehicle.
c. Connect the heated oxygen sensor connector.
2. INSTALL HEATED OXYGEN SENSOR (for Bank 2)