LS 460 V8-4.6L (1UR-FSE) (2007)
/Page-1058003.png)
c. Slide the clamps, and disconnect the No. 4 and No. 5 water by-pass hoses from the throttle body.
d. Remove the gasket from the intake manifold.
INSTALLATION
1. INSTALL THROTTLE BODY
a. Install a new gasket to the intake manifold.
b. Connect the No. 4 water by-pass hose and No. 5 water by-pass hose to the throttle body.
NOTE: Position the claws of the clamps as given in the illustration.
