lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Engine Controls - Techstream(R) ECU Re-Flash Procedure|Page 6060 > < Engine Controls - Techstream(R) ECU Re-Flash Procedure|Page 6058
Page 10
background image

H. Confirm the following:

^

Ignition is ON and engine is OFF or "READY" OFF (hybrid vehicles).

^

Hood is open.

^

All accessories are OFF.

^

Battery voltage is above 11.4 volts.

NOTICE

Verify the vehicle is connected to a battery charger before continuing - If battery voltage falls below 11.4 volts, ECU damage may occur.

Then click Start.

NOTE

If the key is NOT done properly, reprogramming will stop at 10% and Cal 1 will fail to load.

I.

Do NOT disturb the vehicle during flash reprogramming.

NOTE

^

ECU flash reprogramming may take anywhere from 3 - 30 minutes per calibration file.

^

Reprogramming time will vary depending on model and ECU communication protocol. Vehicles using CAN communication protocol will

Engine Controls - Techstream(R) ECU Re-Flash Procedure|Page 6060 > < Engine Controls - Techstream(R) ECU Re-Flash Procedure|Page 6058