lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Engine Controls - Hesitation On Acceleration/DTC P2119|Page 6007 > < Engine Controls - Techstream(R) ECU Re-Flash Procedure|Page 6002
Page 1
background image

PROM - Programmable Read Only Memory: All Technical Service Bulletins
Engine Controls - Hesitation On Acceleration/DTC P2119

L-SB-0033-08 Rev1 

June 6, 2008

Hesitation on Acceleration

Service Category
Engine/Hybrid System

Section
Engine Control 

Market
USA

Applicability

TSIB REVISION NOTICE

^

December 23, 2008 Rev1:

^

The Production Change Information table has been updated.

^

Part numbers have been updated in the Parts Information table.

^

Calibration IDs and ECM part numbers have been updated in the Calibration Information table.

Any previous printed versions of this service bulletin should be discarded.

Introduction

Some vehicles may exhibit a hesitation on acceleration and in some cases set Diagnostic Trouble Code (DTC) P2119 (Throttle Actuator Control Throttle
Body Range/Performance). To enhance the smoothness of acceleration the Engine Control Module/ECM (SAE term: Powertrain Control Module/PCM)
calibration has been revised. In some instances, the replacement of the cylinder heads may also be required. Use the following repair procedure to
address the customer's concern. 

Production Change Information

This TSIB applies to vehicles produced BEFORE the Production Change Effective VINs shown.

Warranty Information

Engine Controls - Hesitation On Acceleration/DTC P2119|Page 6007 > < Engine Controls - Techstream(R) ECU Re-Flash Procedure|Page 6002