LS 460 V8-4.6L (1UR-FSE) (2007)
a. Install the 4 knock sensors with the 4 bolts so that the sensors are angled as given in the illustration.
Torque: 20 N.m (204 kgf.cm, 15 ft.lbf)
NOTE: The acceptable installation angle of the knock control sensors is between 10— upwards and downwards from the horizontal position.
b. Connect the 4 knock sensor connectors.
2. INSTALL SEPARATOR CASE
a. Install the separator case with the 4 bolts.
Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)