LS 460 V8-4.6L (1UR-FSE) (2007)
REMOVAL
1. REMOVE FRONT SEAT OUTER BELT ASSEMBLY
a. Remove the front seat outer belt.
2. REMOVE HEIGHT ADJUSTABLE ANCHOR MOTOR
a. Remove the connector.
b. Pull the motor downward to remove it from the adjuster as shown in the illustration.
3. REMOVE FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY
a. Remove the 2 bolts and adjuster.
INSTALLATION
HINT:
-
Use the same procedures for the LH side and RH side.
-
The procedures listed below are for the LH side.
-
A bolt without a torque specification is shown in the standard bolt chart.
1. INSTALL FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY
a. Install the seat belt with the 2 bolts. First install the upper bolt, and then install the lower bolt.
Torque: 42 N.m (428 kgf.cm, 31 ft.lbf)
2. INSTALL HEIGHT ADJUSTABLE ANCHOR MOTOR