LS 460 V8-4.6L (1UR-FSE) (2007)
3. Check that the level's air bubble is within the red frame.
OK: Level's air bubble is within red frame.
If the bubble is not within the red frame, use a hexagon wrench to adjust bolt A until the air bubble is within the red frame.
HINT:
-
The adjustable range within the level's red frame is ±0.2°.
-
The target angle is +0.2° (upward angle of 0.2°).
d. Adjust the reflector height.
1. Adjust the reflector so that the center of the SST reflector is the same height as the millimeter wave radar sensor.
SST 09870-60000
HINT: Prepare a 10 m (32.81 ft.) string, a string with a sharp-pointed weight (plumb bob), and a 5 m (16.41 ft.) tape measure.
e. Place the reflector.