LS 460 V8-4.6L (1UR-FSE) (2007)
(c)
Install the screw.
(d) Connect the connector.
2. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
3. INSTALL SWITCH BASE HOLE COVER
(a)
Attach the claw and install the cover to the instrument panel safety pad.
4. INSTALL NO. 1 INSTRUMENT CLUSTER MOULDING
5. INSTALL INSTRUMENT SIDE PANEL LH
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
7. INSTALL COWL TOP VENTILATOR LOUVER RH
8. CHECK SRS WARNING LIGHT
(a)
Check the SRS warning light.
9. PERFORM INITIALIZATION
(a)
Perform initialization.
NOTICE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.