LS 460 V8-4.6L (1UR-FSE) (2007)
b. Install the element to the air cleaner case.
c. Install the air cleaner cap to the air cleaner hose assembly with the hose clamp.
Torque: 3.8 N.m (38 kgf.cm, 34 in.lbf)
NOTE: Insert the protrusion of the air cleaner hose into the hole of the hose clamp.
HINT:
-
The hose clamp can be tightened within the range of 2.0 N.m (20 kgf.cm, 18 in.lbf) to 5.5 N.m (56 kgf.cm, 49 in.lbf).
-
When tightening the hose clamp, make sure the hose clamp's end is within the painted white line (width: 2 mm or 0.079 in.).
d. Install the air cleaner cap to the air cleaner case with the 2 clips.
e. Connect the MAF meter connector.
4. INSTALL NO. 1 AIR CLEANER INLET
5. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY
6. INSTALL V-BANK COVER SUB-ASSEMBLY