LS 460 V8-4.6L (1UR-FSE) (2007)
Camshaft Position Sensor: Service and Repair
REMOVAL
1. REMOVE V-BANK COVER SUB-ASSEMBLY
2. REMOVE CAMSHAFT POSITION SENSOR
a. Disconnect the camshaft position sensor connector.
b. Remove the bolt and camshaft position sensor.
INSTALLATION
1. INSTALL CAMSHAFT POSITION SENSOR
a. Install the camshaft position sensor with the bolt.
Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)
b. Connect the camshaft position sensor connector.
2. INSTALL V-BANK COVER SUB-ASSEMBLY