LS 460 V8-4.6L (1UR-FSE) (2007)
Seat Occupant Sensor: Reading and Clearing Diagnostic Trouble Codes
With Manufacturer's Scan Tool
CLEAR DTC
a. Connect the intelligent tester or Techstream to the DLC3.
b. Turn the engine switch on (IG).
c. Turn the tester on.
d. Enter the following menus:
1. Intelligent tester-Select: DIAGNOSIS / OBD/ MOBD / (desired system) / DTC INFO /
2. Techstream-Select: Body / (desired system) / Trouble Codes /
e. Erase the DTCs.
Without Scan Tool
LEXUS does not provide a procedure for Clearing Trouble Codes Without Scan Tool.
With Manufacturer's Scan Tool
CHECK DTC
a. Connect the intelligent tester or Techstream to the DLC3.
b. Turn the engine switch on (IG).
c. Turn the tester on.
d. Enter the following menus:
1. Intelligent tester-Select: DIAGNOSIS / OBD/ MOBD / (desired system) / DTC INFO /
2. Techstream-Select: Body / (desired system) / Trouble Codes /
e. Read the DTCs.
Without Scan Tool
LEXUS does not provide a procedure for Reading Trouble Codes Without Scan Tool.