LS 460 V8-4.6L (1UR-FSE) (2007)
/Page-411001.png)
Ride Height Sensor: Testing and Inspection
Height Control Sensor (For Front LH)
INSPECTION
1. INSPECT HEIGHT CONTROL SENSOR SUB-ASSEMBLY FRONT LH
a. Connect 3 dry batteries of 1.5 V in series.
b. Connect terminal 3 to the batteries' positive (+) terminal, and terminal 1 to the batteries' negative (-) terminal, then apply voltage about 4.5 V
between terminals 1 and 3.
c. Measure the voltage between terminals 1 and 2, when the height control sensor link is slowly moved up and down.
NOTE:
-
Do not apply a voltage of more than 6 V.
-
Do not drop the height control sensor.If it is dropped, replace it with a new one.
