LS 460 V8-4.6L (1UR-FSE) (2007)
1. INSTALL SPEED SENSOR SP2
(a)
Install the speed sensor to the transmission case with the bolt.
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
(b) Connect the sensor connector.
2. INSTALL SPEED SENSOR NC3
(a)
Install the speed sensor to the transmission case with the bolt.
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
(b) Connect the sensor connector.
3. INSTALL SPEED SENSOR NT
(a)
Coat a new O-ring with ATF and install it to the speed sensor.
(b) Using a T30 "TORX" wench, install the speed sensor with the bolt.
Torque: 6.8 N*m (69 kgf*cm, 60 in.*lbf)
(c)
Connect the sensor connector.