LS 460 V8-4.6L (1UR-FSE) (2007)
a. Install the generator rear end cover to the generator coil with the 3 nuts.
Torque: 4.6 N.m (47 kgf.cm, 41 in.lbf)
7. INSTALL GENERATOR PULLEY
SST 09820-63010 (09820-06010, 09820-06020)
a. Install the generator pulley, and temporarily install the pulley lock nut.
b. Install SST1-A to the pulley shaft.
c. Install SST1-B to SST1-A.
d. Hold SST 1-A on the pulley shaft area, and tighten SST 1-B to the specified torque.
Torque: 39.2 N.m (400 kgf.cm, 29 ft.lbf)
NOTE: Securely fix SST1-A to the pulley shaft.
HINT: Read SST1-B tightening torque by using the reactive torque of SST1-A.
e. Mount 2 faces of SST2 in a vise.
f.
With SST1-A and B attached to the generator, insert the pulley lock nut into the hexagon portion of SST2.
g. To tighten the pulley nut, rotate SST1-A in the generator's reverse rotation direction.