LS 460 V8-4.6L (1UR-FSE) (2007)
a. Install the heat insulator with the 3 bolts.
Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)
3. INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY RH
4. INSTALL NO. 1 EXHAUST MANIFOLD HEAT INSULATOR
5. INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE
6. INSTALL FRONT SUSPENSION MEMBER REINFORCEMENT RH
a. Install the front suspension member reinforcement with the 4 bolts.
Torque: 50 N.m (510 kgf.cm, 39 ft.lbf)
7. INSTALL ENGINE UNDER COVER RH
a. Install the engine under cover with the clip and screw.
8. CONNECT FRONT STABILIZER BAR
9. INSTALL ENGINE UNDER COVER REAR RH
10. INSTALL ENGINE UNDER COVER REAR LH
11. INSTALL FRONT EXHAUST PIPE ASSEMBLY
a. Install the front exhaust pipe.
12. INSTALL GENERATOR ASSEMBLY
a. Install the generator.
13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
14. INSTALL COWL TOP VENTILATOR LOUVER RH
15. PERFORM INITIALIZATION