LS 460 V8-4.6L (1UR-FSE) (2007)
a. Align the claw of the center bearing clutch with the groove of the starter yoke, and install the starter yoke.
5. INSTALL STARTER COMMUTATOR END FRAME ASSEMBLY
a. Install the starter brush holder assembly.
b. Using a screwdriver, hold the brush spring back and connect the brush into the brush holder.
c. Connect the 4 brushes.
d. Align the starter commutator end frame rubber with the groove of the starter yoke.
e. Install the starter commutator end frame with the 2 screws.
Torque: 3.8 N.m (39 kgf.cm, 33 in.lbf)
6. INSTALL STARTER DRIVE HOUSING ASSEMBLY