LS 460 V8-4.6L (1UR-FSE) (2007)
/Page-1512002.png)
a. Remove the 2 nuts and suspension control ECU from the bracket.
NOTE:
-
Avoid any impact to the suspension control ECU.
-
Do not drop the ECU. If it is dropped, replace it with a new one.
INSTALLATION
1. INSTALL SUSPENSION CONTROL ECU
a. Install the suspension control ECU to the bracket with the 2 nuts.
Torque: 6.0 N.m (61 kgf.cm, 53 in.lbf)
NOTE:
-
Avoid any impact to the suspension control ECU.
-
Do not drop the ECU. If it is dropped, replace it with a new one.
2. INSTALL SUSPENSION CONTROL ECU WITH BRACKET
a. Install the ECU with bracket with the nut and bolt.
