LS 460 V8-4.6L (1UR-FSE) (2007)
1. INSTALL POWER STEERING ECU
(a)
Attach the claw and install the power steering ECU with the 4 bolts.
Torque: 8.5 N*m (87 kgf*cm, 75 in.*lbf)
(b) Connect connector C to the power steering ECU.
(c)
Connect the 2 power steering ECU connectors A and B and securely lock the connectors.
2. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY
(a)
Install the inlet cover with the 2 clips.
3. INSTALL ENGINE ROOM SIDE COVER
(a)
Install the side cover with the 4 clips.
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. INSTALL COWL TOP VENTILATOR LOUVER RH
6. PERFORM INITIALIZATION
(a)
Perform initialization.
NOTICE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
7. PERFORM VARIABLE GEAR RATIO STEERING SYSTEM CALIBRATION
(a)
Perform variable gear ratio steering system calibration.