LS 460 V8-4.6L (1UR-FSE) (2007)
(d) Detach the 5 clips to separate the steering column upper cover.
4. REMOVE TILT AND TELESCOPIC MANUAL SWITCH
(a)
Disconnect the connector.
(b) Using a screwdriver, detach the claw and pull out the tilt and telescopic manual switch.
NOTICE: Pushing on the claw too hard will break the claw.
HINT: Tape the screwdriver tip before use.
INSTALLATION
1. INSTALL TILT AND TELESCOPIC MANUAL SWITCH
(a)
Attach the claw to install the tilt and telescopic manual switch.
(b) Connect the connector.