LS 460 V8-4.6L (1UR-FSE) (2007)
2. REMOVE NO. 2 ENGINE UNDER COVER
(a)
Remove the 8 bolts and the No. 2 engine under cover.
3. REMOVE FRONT STABILIZER LINK ASSEMBLY LH
(a)
Remove the 2 nuts and the front stabilizer link.
HINT: If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud.
4. REMOVE FRONT STABILIZER LINK ASSEMBLY RH
HINT: Remove the RH side following the same procedures as the LH side.
5. REMOVE ENGINE UNDER COVER SUB-ASSEMBLY LH
(a)
Remove the 2 screws and the engine under cover sub-assembly LH from the front suspension member reinforcement LH.
6. REMOVE ENGINE UNDER COVER SUB-ASSEMBLY RH
HINT: Remove the RH side following the same procedures as the LH side.