LS 460 V8-4.6L (1UR-FSE) (2007)
HINT: Use the same procedures described for the LH side.
4. INSTALL REAR SUSPENSION MEMBER SUB-ASSEMBLY
(a)
Slowly raise the suspension member jack, and install the suspension member to the body.
(b) for Sports package
(1) Install the 2 member stoppers with the 4 bolts labeled B, and install the 4 bolts labeled A.
Torque:
19 N*m (194 kgf*cm, 14 ft.*lbf) for bolt labeled A
127 N*m (1295 kgf*cm, 94 ft.*lbf) for bolt labeled B
(c)
for Standard
(1) Install the 4 bolts labeled B.
Torque: 127 N*m (1295 kgf*cm, 94 ft.*lbf)
5. CONNECT PNEUMATIC CYLINDER WITH REAR SHOCK ABSORBER ASSEMBLY LH (for Air suspension)
6. CONNECT PNEUMATIC CYLINDER WITH REAR SHOCK ABSORBER ASSEMBLY RH (for Air suspension)
HINT: Use the same procedures described for the LH side.
7. CONNECT REAR SHOCK ABSORBER ASSEMBLY LH (for Coil suspension)
8. CONNECT REAR SHOCK ABSORBER ASSEMBLY RH (for Coil suspension)
HINT: Use the same procedures described for the LH side.
9. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY LH