LS 460 V8-4.6L (1UR-FSE) (2007)
(b) Temporarily install the rear shock absorber lower side with a new nut and washer to the axle carrier.
(c)
Tighten the new lock nut.
Torque: 27 N*m (275 kgf*cm, 20 ft.*lbf)
2. INSTALL REAR SHOCK ABSORBER CAP LH
(a)
Install the cap with the 3 nuts to the shock absorber.
Torque: 14 N*m (143 kgf*cm, 10 ft.*lbf)
3. CONNECT TOE CONTROL LINK SUB-ASSEMBLY LH
4. CONNECT REAR UPPER NO. 2 CONTROL ARM ASSEMBLY LH
5. CONNECT REAR UPPER NO. 1 CONTROL ARM ASSEMBLY LH
6. STAKE REAR AXLE SHAFT LH NUT
7. INSTALL LOAD SENSING VALVE SENSOR BRACKET
8. INSTALL REAR SPEED SENSOR LH
9. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY
10. INSTALL ROOF SIDE GARNISH INNER LH
(a)
Install the garnish for standard body.
(b) Install the garnish for long body.
11. INSTALL ROOF SIDE GARNISH INNER RH
HINT: Use the same procedures described for the LH side.
12. INSTALL REAR SEAT SIDE GARNISH LH
(a)
Install the garnish for standard body.
(b) Install the garnish for long body.
13. INSTALL REAR SEAT SIDE GARNISH RH
HINT: Use the same procedures described for the LH side.
14. INSTALL REAR DOOR SCUFF PLATE LH
(a)
Install the scuff plate for standard body.
(b) Install the scuff plate for long body.
15. INSTALL REAR DOOR SCUFF PLATE RH
HINT: Use the same procedures described for the LH side.
16. INSTALL REAR SEATBACK ASSEMBLY (for Fixed Seat Type)
17. INSTALL REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type)
18. INSTALL REAR SEATBACK ASSEMBLY CENTER (for Power Seat)
19. INSTALL REAR SEATBACK ASSEMBLY RH
(a)
Install the rear seatback for power seat.
(b) Install the rear seatback for ottoman.