LS 460 V8-4.6L (1UR-FSE) (2007)
REMOVAL
1. REMOVE COWL TOP VENTILATOR LOUVER
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
NOTICE: After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of
memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-)
battery terminal.
3. DISCONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY
(a)
Remove the nut and disconnect the floor shift gear shifting rod.
4. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(a)
Disconnect the switch connector.
(b) Remove the nut, spring washer and transmission control shaft lever.
(c)
Using a screwdriver, pry off the lock washer.