LS 460 V8-4.6L (1UR-FSE) (2007)
check the shift lever assembly installation condition.
REMOVAL
1. REMOVE COWL TOP VENTILATOR LOUVER
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
NOTICE: After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of
memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-)
battery terminal.
3. REMOVE CONSOLE BOX ASSEMBLY
(a)
Remove the console box.
4. REMOVE NO. 1 CONSOLE BOX DUCT
(a)
Remove the 2 screws and pull out the duct.
5. DISCONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY
(a)
Move the shift lever to the N position.
(b) Remove the nut and disconnect the shifting rod from the connecting rod swivel.
6. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY
(a)
Disconnect the 2 connectors.
(b) Disconnect the 5 wire harness clamps from the floor shift.
(c)
Remove the 4 bolts and floor shift.
DISASSEMBLY
1. REMOVE SHIFT POSITION INDICATOR