LS 460 V8-4.6L (1UR-FSE) (2007)
/Page-1186005.png)
1. INSPECT TRANSMISSION WIRE (ATF TEMPERATURE SENSOR)
(a)
Measure the resistance of the transmission wire.
Standard resistance
HINT: If the resistance is not within the specified range of any of the ATF temperatures shown in the table above, the driveability of the
vehicle may decrease.
INSTALLATION
1. INSTALL TRANSMISSION WIRE
(a)
Coat a new O-ring with ATF and install it to the transmission wire connector.
(b) Install the transmission wire.
(c)
Install the bolt.
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
(d) Connect the wire connector.
